Equipment operation
Arrange instruments, pushbuttons, indicators and controller interfaces to operating needs.
Cabinets & Enclosures · Instrument Display & Monitoring
Instrument Control Boxes
For mounting and wiring instruments, displays, monitoring devices and small control assemblies. Panel cut-outs, internal mounting and terminal configuration follow the instrument / controller list and project drawings.
Available empty or assembled with instruments / controllers. Empty enclosures have no complete-equipment voltage or current ratings and do not include electrical devices or wiring by default. Instruments, sensors, field cables and external equipment are included only as listed.
Exterior image slot
Instrument box photograph pending confirmation
Typical Instrument & Small-Control Applications
These uses help assess suitability; they are not completed project references.
Process measurement
Select instruments and signal interfaces for tasks such as temperature, pressure and flow measurement.
Status display
Configure display instruments and electrical-parameter monitoring as required; confirm field signal sources separately.
Small control assemblies
Define enclosure and terminal layout from device dimensions, wiring and operating space.
Parameters & Configuration
Options follow manual pages 30–31. Power and signals must match the selected devices; instrument, interface and protection options are not all included or supported by default.
| Item | Listed options / configuration | To confirm for the project |
|---|---|---|
| Assembled supply voltage | DC 24 V / AC 220 V / AC 230 V | Other voltages follow selected devices and scheme. Empty enclosures have no complete-equipment voltage or current ratings. |
| AC supply frequency | 50 / 60 Hz (AC only) | Frequency does not apply to DC supply; AC frequency is not assigned to DC. |
| Instrument configuration | Temperature, pressure, flow and electrical-parameter instruments | Selected to measurement tasks; not all instruments or field sensors are included by default. |
| Signal interfaces | Discrete / 4–20 mA / 0–10 V / communication signals | Confirm selected devices, signal specifications and interface requirements; not all signal types are supported by default. |
| Installation | Wall-mounted / recessed / bracket-mounted | Other methods are project-specific. |
| Degree of protection | IP40 / IP54 / IP55 / IP65 | Confirm specific construction, openings, installation and operating environment; other ratings require assessment. |
| Thickness options | 1.0 / 1.2 / 1.5 / 2.0 mm | Body, front panel and mounting plate are confirmed separately; other thicknesses are project-specific. |
| Material & surface treatment | Cold-rolled steel / galvanized steel / stainless steel | Material, compatible finish and colour are project-specific. |
| Panel & internal construction | Instrument cut-outs, pushbuttons, indicators, mounting plate and terminals | Layout, dimensions and included items follow confirmed drawings and lists. |
| Dimensions & cable entry | Width × height × depth, in mm | Defined by device dimensions, wiring, operating space and interfaces. |
Signal types do not establish measurement accuracy or an instrument-calibration commitment. Confirm instrument models, interfaces and check conditions separately.
Final parameters, configuration and scope of supply are subject to the confirmed drawings and order agreement.
Empty & Assembled Supply Scope
Empty enclosure
Mechanical enclosure for subsequent instrument installation.
- Body, front panel, mounting plate, locks and mechanical accessories follow the list.
- Panel cut-outs, mounting and cable interfaces follow confirmed drawings.
- Instruments, controllers, sensors, terminals and internal wiring are not included by default.
Assembled instruments / controllers
Assembly follows the confirmed device list and drawings.
- Instruments, controllers, pushbuttons, indicators and terminals are selected as required.
- Internal mounting and wiring follow electrical and panel-layout drawings.
- Specify individually whether sensors, field cables, external equipment and accessories are included.
Interfaces & Additional Scope
Instrument calibration, metrological certification, control programs, site commissioning and complete system integration are not included by default. Related work, external equipment, interfaces and deliverables follow the list and explicit agreement.
Define Needs from Instruments & Panel Drawings
Provide measurement / display tasks and installation conditions to define devices, signals, enclosure and supply boundaries.
You provide
- Quantity, instrument / controller list and empty or assembled supply.
- Power supply, signal types and specifications, communications and equipment interfaces.
- Panel cut-out drawings, mounting method, width × height × depth and operating space.
- Material, protection requirements, environment, cable entry and external-equipment list.
GoodQi confirms
- Instrument selection, power / signal compatibility, terminals and wiring configuration.
- Panel cut-outs, internal layout, thicknesses by part and mounting interfaces.
- Included sensors, field cables, external equipment and related work.
- Confirmed drawings, supply list, functional-check scope, test conditions and delivery documents.
Use Additional Requirements for instrument tasks, signals and installation needs. After preparing the draft, attach device lists, panel cut-out drawings and wiring information in your email app.
Request an Instrument Box QuoteQuality Checks & Delivery Documents
Incoming, assembly and outgoing checks follow the confirmed product configuration and order scope.
Checks for the supplied equipment
- Empty-enclosure mechanical checks
- Check dimensions, panel cut-outs, finish, assembly, locks and accessory completeness against drawings.
- Assembled wiring & functional checks
- Check devices, terminals and internal wiring for the supplied configuration. Functional checks follow the agreed scope, input signals and test conditions.
Documents agreed for the project
- Panel, outline and mounting drawings
- Agreed device and supply lists
- Wiring and interface drawings where applicable
- Records of agreed mechanical, wiring and functional checks
Documents and check scope follow the order agreement. Box functional checks are not sensor calibration, metrological certification or site system commissioning.
Instrument Control Box FAQ
Does an empty box carry DC24V or AC-frequency ratings?
No complete-equipment electrical ratings are specified for empty supply. DC24V / AC220V / AC230V apply to assembled configurations confirmed against devices. 50/60Hz applies only to AC; no frequency is assigned to DC.
Are all instruments, sensors and signal interfaces included?
Not by default. Temperature, pressure, flow and electrical-parameter instruments are selected to the task. Discrete, 4–20mA, 0–10V and communication signals depend on devices and interfaces; field sensors are listed separately.
How does this differ from a PLC control cabinet?
This page focuses on panel mounting and wiring for instrument display, monitoring and small controllers. PLC cabinets focus on I/O acquisition, logic control and equipment interlocking. Where both are involved, confirm devices and system interfaces for the project.
Do functional checks include calibration or site commissioning?
Not by default. Box functional checks are limited to the agreed scope and test conditions; they are not sensor calibration, metrological certification or site system commissioning.
How do I enquire about an instrument control box?
The quote button preselects this product. Enter instruments, power, signals and mounting needs, prepare the draft, then attach panel drawings and device information in your email app and review before sending.
Discuss Your Instrument Control Box Requirements
Final parameters, configuration and scope of supply are subject to the confirmed drawings and order agreement.